![]() Like previous releases since v5, the MemTest86 V6.3 image supports dual booting (UEFI/BIOS). On machines that don't support UEFI, the older V4 BIOS release of MemTest86 will be automatically booted. New configuration file parameters MINSPDS, SPDMANUF and SPDPARTNO to specify the values that the RAM SPD must match before allowing the tests to start.MemTest86 V6.3.0 has been digitally signed by Microsoft and therefore is compatible with Secure Boot. This may be useful for RAM manufacturers that need to verify that the SPD data has been programmed correctly. New configuration file parameter SKIPSPLASH to skip the 10 second splashscreen and proceed directly to the main menu.New mode for the configuration file parameter AUTOMODE to specify that MemTest86 shall run the tests immediately (skipping the splashscreen and main menu) but prompt the user to save the results after test completion. ![]() + 15 other fixes/enhancements ( Full list of changes can be found here).New configuration file parameters ADDR2SLBITS and ADDR2CSBITS to specify the bit positions of a memory address to exclusive-or (XOR) to determine which DIMM slot/chip select (0 or 1) corresponds to the failure address. The Pro Edition can be purchased from our sales page, either as USB image files that users can install on their own USB flash drives, or an already-made USB flash drive with MemTest86 pre-installed. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |